Loading the figure…
Stopped · Your code isn't running yet. Until you press Run, the board runs the program already on it.
Nothing printed yet. Press Run.
Not checked yet
Run your code to check it. The checks replay a fixed script on a virtual clock, so the same code always gets the same result.
Each fault really happens in the simulation. Trigger one, watch the figure, then read why.
Play the world: press, slide and turn the parts while the code runs.
Change a value here or click a chip in the code.
A small project: touch the logo to play a note and count it, press A to print the count with the temperature.
| Pin | Connects to | What it does |
|---|---|---|
P0 | A buzzer or headphones (optional) | The note plays here too |
Sensors and actuators this board drives, with the real connections.
Ring 0 and GND: music already plays on pin 0, so it beeps along with the speaker.
| Part pin | Board pin |
|---|---|
| + | P0Wire colour orange |
| - | GNDWire colour black |